WindsorONE Protected - Primed Finger Joint Pine Shiplap Boards, 16 ft. Length
WindsorONE Protected - Primed Finger Joint Pine Shiplap Boards, 16 ft. Length
by WindsorONE
While all WindsorOne products (Traditional & Protected) are Made in USA of real wood, finger jointed and coated with three coats of acrylic latex primer, WindsorOne Protected - Primed Finger Joint Pine - Shiplap Boards are treated with the Tru-Core process prior to priming. This Tru-Core preservative penetrates the entire board with 5 decay & termite actives (including Formosan). Water based, and safe for interior use, WindsorOne Protected excels when used on exterior surfaces. Protected Shiplap Boards are smooth-surfaced on 1 side, and rough on the other, and can be installed horizontally or vertically. The back of all WindsorONE Protected Boards contain an ink stamp "WindsorONE Protected" Manufactured in USA.
Nonstructural decorative trim product and should not be used where structural lumber properties are required. The trim is designed to be applied to structural framing, sheathing and other materials. Made for both interior and exterior use. Refer to the installation guide for additional information.
PRIME ALL CUTS BEFORE INSTALLATION. This includes cuts that can’t be seen or may not be directly exposed to weather (Not to be used for exterior siding).
Coverage:
- 1 x 6 = Sq. ft. to cover x 1.9 = Linear feet required.
- 1 x 8 = Sq. ft. to cover x 2.5 = Linear feet required.